转角解决方案

Article 47270
3D-profile
Work size:
592 x 150 x 42 mm
Weight: 3.55 kg / pieces

Article K140H
Radial corner piece
Work size:
592 x 52 x 8 mm
Weight: 1.60 kg / pieces

Article K150
Corner profile 55
Work size:
592 x 55/55 x 8 mm
Weight: 1.75 kg / pieces

Corner profile 90
Work size:
90/90 x 15 mm
Weight: ca. 7.75 kg / lin. m.
Available in lengths corresponding to the
vertical grid of the KeraTwin® panels

Article 360
Twin-clamp KT
Weight: 20 kg / 1,000 pieces
Perforation: 4 x 3.3 mm Ø
Base plate: painted black
Lips: painted black*
Material: 1.4571

Article 361
Edge-clamp KT
Weight: 20 kg / 1,000 pieces
Perforation: 4 x 3.3 mm Ø
Base plate: painted black
Lips: painted black*
Material: 1.4571

Article 365
Terminal-clamp KT
Weight: 20 kg / 1,000 pieces
Perforation: 4 x 3.3 mm Ø
Base plate: painted black
Lips: painted black*
Material: 1.4571

* Painted lips in other colours available on request.

Article 676
A2 stainless steel screw, black
Weight: 0.9 kg / box
Nom. dimen.: 3.5 x 9.5 mm
Box contents: 1,000 pieces

Article 675
Stainless steel blind rivet, black
Weight: 1.05 kg / box
Nom. dimen.: 3.2 x 9.5 mm
Box contents: 500 pieces

Design solutions

Rectangular tube
50 x 60 mm / 60 x 60 mm**
Work size:
50 x 60 mm / 60 x 60 mm
Weight: 50 x 60 mm: 4.29 kg / lin. m.
60 x 60 mm: 4.49 kg / lin. m.
Glazed: possible on 3 sides. 4 glazed sides
up to 1,200 mm available on request.

Rectangular tube
50 x 100 mm**
Work size:
50 x 100 mm
Weight: 6.84 kg / lin. m.
Glazed: possible on 3 sides. 4 glazed sides
up to 1,200 mm available on request.

Lamellar element

Work size:
140 x 60 mm
Weight: 9.00 kg / lin. m.
up to a length of 1,200 mm

Article 605
Fastening set
Rectangular tube 60 x 50 mm
painted black

Article 606
Fastening set
Rectangular tube 60 x 60 mm
painted black

Article 607
Fastening set
Rectangular tube 50 x 100 mm
painted black

Article 608
Fastening set
Lamellar element
painted black

Matching rubber spacers available on request.

The following applies to all ceramic special pieces on this page:

HT coating not possible - except for the radial corner piece (art. no. K140H)
Available in the colours “natura unglazed” and “SpectraView” (glazed)
Not possible in the colours of the series “design glazed”!
For technical reasons at production, slight colour differences compared to the standard products may occur.

Important:
The use of silicone caoutchoucs must be absolutely avoided, because silicone fluids segregate and effect sticky surfaces on which dirt adheres. Therefore, only use the system components mentioned (foamed pieces, EPDM rubber profile, neoprene rubber washer) and pointing, bonding and sealing materials recommended by us. We will be pleased to inform you in detail. The usual final cleaning after completion of the construction works is still required.

** available in lengths of up to 1,500 mm