Fastening with vertical system rail K20
Article 620
System rail, painted*
Material: AlMg3 H22 (EN AW-5754)
painted black, for installation
with joint spacer K20/8
Article 625
System rail, bright*
Material: AlMg3 H22 (EN AW-5754)
unpainted, for installation
with joint profile K20/8
Article 630
System rail, external angle*
Material: AlMg3 H22 (EN AW-5754)
unpainted, for installation
of mitre-cut panels and
externalangle profiles
Article 635
Embrasure profile*
Material: AlMg3 H22 (EN AW-5754)
unpainted
Dimensions and grid according
to project-specific requirements
Article 640
Joint profile K20/8
Material: AlMg3 H22 (EN AW-5754)
painted black
with protective film
RAL-colour-painted on request
Article 645
Joint spacer K20/8
Weight: 0,5 kg / box
Material: AlMg3 H22 (EN AW-5754)
Box contents: 250 pieces
painted black
Article 650 / 652 / 654
External angle profile Square / Sword / Negative
Material: AlMg3 H22 (EN AW-5754)
painted black
RAL-colour-painted on request
Article 658
Al blind rivet, bright
Weight: 1,3 kg / box
Nominal dimensions: 4.8 x 10 mm
Box contents: 500 pieces
for system rail and Omega profile installation
Article 659
A4 stainless steel screw, bright
Weight: 2,8 kg / box
Nominal dimensions: 4.8 x 16 mm
Box contents: 1,000 pieces
for system rail and Omega profile installation
System rails, joint profile K20/8 and external angle profiles are available for panel grids 20 cm - 25 cm - 30 cm - 35 cm - 40 cm. Other grids on request.
Fastening with vertical Omega profile K20 and vertical T-profile K20
Article 624
Omega profile, painted*
Material: AlMg3 H22 (EN AW-5754)
painted black, for installation
with joint spacer K20/8
Article 627
Omega profile, bright*
Material: AlMg3 H22 (EN AW-5754)
unpainted, for installation
with joint profile K20/8
Article 633
Omega profile, external angle*
Material: AlMg3 H22 (EN AW-5754)
unpainted, for the installation
of mitre-cut panels and external angle profiles
Article 690
T-profile K20 with joint profile, pained
Material: AlMg3 H22 (EN AW-5754)
painted black
Article 698
T-profile K20 with recessed joint profile, painted
Material: AlMg3 H22 (EN AW-5754)
painted black
Article 695
T-profile K20 without joint profile, painted
Material: AlMg3 H22 (EN AW-5754)
painted black, for installation
with joint spacer K20/8
Article 645
Joint spacer K20/8
Weight: 0,5 kg / box
Material: AlMg3 H22 (EN AW-5754)
Box contents: 250 pieces
painted black
Omega profiles available for panel grids of 20 cm - 22.5 cm - 25 cm - 27.5 cm - 30 cm - 32.5 cm - 35 cm - 37.5 cm - 40 cm - 45 cm - 50 cm. Other grids on request.
K20 扣件固定系统
Article 680
Twin-clamp K20*
Weight: 45 kg / 1,000 pieces
Perforation: 2 x 3.3 mm Ø
Material: AlMg3 H22 (EN AW-5754)
painted black
Article 681
Edge-clamp K20*
Weight: 24 kg / 1,000 pieces
Perforation: 4 x 3.3 mm Ø
Material: AlMg3 H22 (EN AW-5754)
painted black
Article 682
Edge-clamp K20, left
Weight: 24 kg / 1,000 pieces
Perforation: 4 x 3.3 mm Ø
Material: AlMg3 H22 (EN AW-5754)
painted black
Article 683
Edge-clamp K20, right
Weight: 24 kg / 1,000 pieces
Perforation: 4 x 3.3 mm Ø
Material: AlMg3 H22 (EN AW-5754)
painted black
Article 684
Single-clamp K20
Weight: 45 kg / 1,000 pieces
Perforation: 2 x 3.3 mm Ø
Material: AlMg3 H22 (EN AW-5754)
painted black
Article 675
Stainless steel blind rivet, black
Weight: 1.05 kg / box
Nominal dimensions: 3.2 x 9.5 mm
Box contents: 500 pieces
Article 506
Joint tape, black
Weight: 0.5 kg / roll
Nominal dimensions: 40 mm wide,, 50 m
self-adhesive, weather-resistant
Clamp delivery:
- Twin- and single-clamps: 7 pieces/string
- Edge-clamps: 13 pieces/string
Important:
The use of silicone caoutchoucs must be absolutely avoided, because silicone fluids segregate and effect sticky surfaces on which dirt adheres. Therefore,
only use the system components mentioned (foamed pieces, EPDM rubber profile, neoprene rubber washer) and pointing, bonding and sealing
materials recommended by us. We will be pleased to inform you in detail. The usual final cleaning after completion of the construction works is still
required.
* legally protected
