KeraTwin® K18 with adapter fastening
System description
The facade panels KeraTwin® K18 have dovetail grooves on the
back into which at least four adapters per panel are pushed
(symmetrical arrangement). The position of the adapters in the
panel depends on the static requirements. The KeraTwin® K18
panel is hung in horizontally installed supporting rails by means
of these adapters. The stainless steel springs inserted in the
adapters serve for the nonrigid installation. A spacer put in the
grooves, which is adjusted to the joint width, secures the position
of the panels.
KeraTwin® K18 with adapter fastening on system substructure (horizontal)
Essential system advantages
- Rapid panel installation with well thought-out system components
- The low panel weight of 32 kg/m2 facilitates transport and handling and also permits the use in case of a statically demanding building structure
- Installation in semi-bond or irregular bond is possible
- Great design scope thanks to a wide variety of sizes with a panel thickness of 18 mm
Important:
The use of silicone caoutchoucs must be absolutely avoided, because silicone fluids segregate and effect sticky surfaces on which dirt adheres. Therefore,
only use the system components mentioned (foamed pieces, EPDM rubber profile, neoprene rubber washer) and pointing, bonding and sealing
materials recommended by us. We will be pleased to inform you in detail. The usual final cleaning after completion of the construction works is still
required.